Standard 14,000-rpm, CAT40 spindle

• Ideal blend of speed, power and torque for wide range of applications and materials including steel, cast iron, aluminum,
   brass, plastics

• Duty rated at 33.5 HP (24.2 HP continuous), 130 ft-lbs/175.1 Nm peak torque (70.5 ft-lbs/95.5 Nm continuous)

• Spindle design provides stiffness and rigidity at the lower speed ranges, and vibration-free, chatter-free, high-speed
   cutting

• Large-diameter bearings

• Air – oil lubrication and jacket-spindle temperature control

• Large-capacity, heat-dissipating spindle chiller

Optional 20,000–rpm, HSK-A63 spindle

• Enables higher productivity in aluminum and other higher-spindle-speed applications

Coolant systems

• Flood, overhead shower, flush and through-spindle coolant standard

• Spiral chip augers quickly and efficiently evacuate chips and coolant

• Coolant tank sized to support various coolant systems

• Cyclonic filtration

• Improves productivity, tool life and surface finish

Automatic Tool Changer (ATC)

Field-proven, bidirectional, random-access design provides quick, reliable tool exchange

"Special" tool-change functionality for large, heavy and fixed tool processing

• Autorecovery capability

Standard lift-up chip conveyors (LUCC)

• Scrapper standard

• Configure chip handling to specific applications:

• Hinged/belt – alternative selection

• Scrapper/drum option

• Greater productivity/flexibility, reduced operator burden

33.5 HP
(24.2 HP continuous)

130 ft-lbs/175.1 Nm peak torque
(70.5 ft-lbs/95.5 Nm continuous)

Powerful structure

• Cast–iron bed, column, saddle, carrier and table components provide optimal rigidity and torsion
   stiffness for consistent results

Core-cooled ballscrews

• Manage and reduce thermal growth

• Shorten thermal saturation time, virtually eliminating "warm-ups"

• Maintain lower system operating temperature

• Control thermal drift

• Improve accuracy

• Increase component longevity

Outstanding production tolerance
performance

• Linear positioning accuracy: ±0.000100" (±0.0025mm)

• Repeatability: ±0.000078" (±0.0020mm)

Optimal ergonomics

• Easy operator access reduces part exchange load times and operator fatigue

• Wider chip and splashguard doors accommodate full-size workpieces

• Machine ceiling opens to facilitate workpieces and fixtures that require overhead crane

Professional P control software

• Color LCD with menu-driven touch screen

• 400 registrable programs

• 400 tool-offset pairs

• 48 pairs of work-coordinate systems

• Increased production flexibility and productivity

• Reduced operator burden

Integral ATC shutter

Separates machine cutting zone from the tool magazine to prevent chips and coolant migration into the tool magazine

30-tool magazine

Sufficient capacity for a wide variety of production applications