Search

The EDNC6 machine provides similar high performance as the EDAF-Series, but with larger X/Y/Z strokes and larger work tank. The standard configuration EDNC6 utilizes a three-sided programmable rise-and-fall work tank that positions below the table level and accommodates work piece sizes up to 39”...

The EDNC17 offers the same utility and capability as the smaller EDNC15 machine, but provides larger X/Y strokes and a larger work tank area.

The physique to tackle extremely large part details, with the fineness and precision of smaller machines.
The U86 Wire EDM machine provides larger machine travels and work tank to accommodate parts up to 1,400mm x 987mm (55.1" x 38.8“) with weights up to 3,000kg (6,614 lbs.).
 

High-accuracy and high-speed machining on a large, rigid design.
The U1310 Wire EDM machine provides two very unique attributes on an extremely large machine with its ability to achieve high accuracy and productive high-speed machining.

Makino Makes It Easy to Upgrade with Flexible Financing Options

A V22 high precision vertical machining center was chosen to machine the part from roughing to finishing. The machining process began with top face roughing of the part using a 15-mm Pokholm face mill at 7500RPM. The outside perimeter was then machined with a 1.3-mm ball-nosed endmill running at 30,000RPM....

A previously outsourced retainer mold featuring 5,700 holes was machined on an EDGE2 Fine Hole using 0.0120 inch diameter hollow, copper pipe electrodes. Each hole required a 0.0132 inch finished hole diameter with a tolerance of ±0.0002 inch. _x000D_ _x000D_ The EDGE2 Fine Hole's precision...

Runoff Requirements 1.67 Cpk Machines 3 A55 / System installation with MMC Tooling 49 tools  Special tooling: Step “G”  drills and 6 step  Mapal reamers Parts Automotive...

THE CHALLENGE Campbell Engineering specializes in producing highly complex, low-volume components, primarily for medical devices. The Lake Forest, Calif., company began to experience growing pains after transitioning its operation from that of a contract machine shop producing prototype...

The objective of the MCD1816 demonstration is to show that two operations are eliminated by machining a die in the hard state.   ELIMINATING CYCLE TIME AND BENCHING. Air Foil Demo Summary The objective of the MCD1816 demonstration is to show that two operations...