Search

Steering Knuckle Tooling 12 tools  Special tooling: Combination tool to drill, face chamfer and circle interpolate back side chamfer.  1:6 taper drill. Face and back side debur tool. Machines 24...

Runoff Requirements 1.67 Cpk Machines 3 A55 / System installation with MMC Tooling 49 tools  Special tooling: Step “G”  drills and 6 step  Mapal reamers Parts Automotive...

Cylinder heads Machines 12 - A66s with Gantry Loaders (GSA)  3 - A88Es with Fanuc Pedestal Robots Material Aluminum Parts Automotive cylinder heads Fixtures Hydraulic Operation OP20...

The objective of the demonstration is to show how a mold_x0012_s complexity and the prescription of its optics make it impossible to maintain geometry if you hand polish the finish. The EDGE2 will demonstrate finishing without polishing.   COMPLEX MOLDS, SUPERIOR SURFACES Head...

The objective of the MCD1816 demonstration is to show that two operations are eliminated by machining a die in the hard state.   ELIMINATING CYCLE TIME AND BENCHING. Air Foil Demo Summary The objective of the MCD1816 demonstration is to show that two operations...

The objective of the demonstration is to show the Hyper 5’s ability to machine a turning tool insert die electrode made from silver tungsten.   SGI OFFERS BETTER SURFACE FINISH Carbide Pill Die Insert Demo Summary The objective of the demonstration is...

Runoff Requirements 1100-piece runoff at 1.67 Ppk for selected features 1.0 on all other features Material Aluminum 380 Parts Automotive airbody Fixtures Hydraulic clamping, 8 parts per fixture Tooling Special...

Part Cycle Time/Volumes 13.94 minutes / 32,900 parts per year Operation 2, Op 10= 31 features, Op20 = 81 features Machines 3 A55E’s in a Gantry Cell Tooling All fine bores are processed using...

The automotive industry’s need for textured parts has risen steadily over the past few years.In response to this need, the process of mold cavity texturing has evolved — rapidly.   CLOSING THE QUALITY GAP The automotive industry’s need for textured parts...

Tooling 10 tools Special tooling: 160mm dia. T-bar cutter with 8 inserts; PCD 43mm dia. I.D. groove tool with 6 inserts, 3 effective Runoff Requirements 20 features held to 2.0 Cpk.  All other features (100)...