EDNC6 RAM EDM

THE VERSATILITY, SPEED AND ACCURACY
FOR ACHIEVING OPTIMUM PERFORMANCE
 
The EDNC6 machine provides similar high performance as the EDAF-Series, but with larger X/Y/Z strokes and larger work tank. The standard configuration EDNC6 utilizes a three-sided programmable rise-and-fall work tank that positions below the table level and accommodates work piece sizes up to 39” x 29” (1,000mm x 750mm). The EDNC6 is also available in a wide tank version that supports larger-sized parts up to 55” x 35” (1,400mm x 900mm) and utilizes a programmable rise-and-fall front door. All EDNC6 machines permit excellent access to the work zone and stationary worktable for faster workpiece setups and process monitoring, and incorporate the dielectric reservoir into the base casting to improve thermal stability and minimize floor space requirements.
 
The performance of the EDNC6 is unmatched with its power and flexibility using the intuitive Hyper-i control system that makes effective use of Makino’s advanced HyperCut and SuperSpark™ IV technologies. Hyper-i uses a wide hi-definition touch screen with a graphical interface that improves machine productivity by intelligently streamlining operations so that operators at all skill levels can achieve the most efficient results. The capability and ease of operation of the Hyper-i control is further enhanced with integrated on-board digital manuals, intelligent E-Tech Doctor help functions and e-learning training system that can be quickly accessed for operator convenience. The Hyper-i control contains many useful functions that assist the operator with programming and operation and ensure the selection of the most productive and efficient process.     
 
The EDNC6 is also available with optional features that further enhance productivity. An available integrated ATC (automatic tool changer) system sits external to the work tank, which allows full utilization of the entire machine stroke and work tank without any process limitations. The HS-Rib Z-axis configuration reduces rough machining speeds of small-size electrode details like tooling ribs and provides sustained high-speed jump motions of up to 20m/min with 1.5G acceleration with an integrated core-cooled ballscrew. The achieved performance of the HS-Rib can reduce machining times by up to 60 percent and deliver the same high-speed and high-accuracy machining capabilities found on smaller machines on a larger platform.
request a quote

To learn more about pricing and availability on a Makino machine, click here and receive a detailed quote.

request a quote

Product Family

Table Size31.5" x 21.7"800 x 550 mm
X25.6"650 mm
Y17.7"450 mm
Z13.8" (19.7")350 mm (500 mm)
Tank Size43.3" x 29.5" x 17.7"1,100 x 750 x 450 mm
Rib Head AvailableNo
Drop TankYesYes
Rapid Traverse197 ipm5,000mm/min
Optional ATC CapacityNo
Max Electrode Weight220 lbs100 kg
Max Available Amperage60A ~ 240ANo

Call Makino at 1-800-552-3288.
Complete the Makino Quote Request on www.Makino.com.

View all webinars

Webinars

Sinker EDM techniques for High Speed, Low Electrode Wear and Fine Finish Machining

Sinker EDM techniques for High Speed, Low Electrode Wear and Fine Finish Machining

EDM’ers have always been challenged to produce fine surface finishes in sho...

View webinar
Reducing Cycle Times In Difficult Sinker EDM Applications

Reducing Cycle Times In Difficult Sinker EDM Applications

Producing deep thin ribs, shaped ribs and speaker grilles can often require...

View webinar
Additive EDM Processes (HQSF) – Seeing Through the Murk

Additive EDM Processes (HQSF) – Seeing Through the Murk

Additive EDM processes can greatly improve productivity in applications tha...

View webinar
ArcFree Technology and the new EDAF Series Sinker EDM

ArcFree Technology and the new EDAF Series Sinker EDM

Introducing Makino’s latest advancements in sinker EDM technology, the new ...

View webinar
EDM Probing Technologies

EDM Probing Technologies

This webinar will cover Makino’s EDM probing system solutions and technolog...

View webinar
New Sinker EDM Technologies

New Sinker EDM Technologies

This webinar highlights the new developments in Makino’s exceptional and co...

View webinar
The Hyper-i Control revolution

The Hyper-i Control revolution

See the future of EDM control technologies! Learn about Makino’s expanded ...

View webinar

Videos

High Speed Z Axis Deep Rib Machining on a Makino EDNC65 Sinker EDM

High Speed Z Axis Deep Rib Machining on a Makino EDNC65 Sinker EDM

Watch video
Makino

Makino's EDAF-Series Sinker EDM with ArcFree Technology Spark Gap Monitoring and DC Arc Pr...

Watch video
EDNC6 Sinker EDM High-Speed Rib Machining with HyperCut Technology

EDNC6 Sinker EDM High-Speed Rib Machining with HyperCut Technology

Watch video
User-Friendly Productivity Enhancements of Hyper-i Control for Sinker EDM

User-Friendly Productivity Enhancements of Hyper-i Control for Sinker EDM

Watch video

Press Releases and Articles

Makino Expands SST Consumables Business in Merger with Global EDM Supplies

Makino Expands SST Consumables Business in Merger with Global EDM Supplies

Read press release
Makino Q1 2017 Online Seminar Schedule Highlights Advancements for Improved Productivity

Makino Q1 2017 Online Seminar Schedule Highlights Advancements for Improved Productivity

Read press release
Makino Unveils ProNetConneX: The IIoT Interface for a New Era of Industry

Makino Unveils ProNetConneX: The IIoT Interface for a New Era of Industry

Read press release
Makino at IMTS 2016: Where Human Ingenuity Meets Automation

Makino at IMTS 2016: Where Human Ingenuity Meets Automation

Read press release
Makino Expands EDNC-Series Line with New EDNC10, EDNC15, EDNC20 Sinker EDMs

Makino Expands EDNC-Series Line with New EDNC10, EDNC15, EDNC20 Sinker EDMs

Read press release
Makino EDNC6, EDNC8 Sinker EDMs: Competitive Precision, Speed and Ease of Use for Large Workpieces

Makino EDNC6, EDNC8 Sinker EDMs: Competitive Precision, Speed and Ease of Use for Large Wo...

Read press release