The J6 family of HMC’s is designed specifically around machining of near-net shape, non-ferrous workpieces, with a compact floor layout, in three kinematic variations. Two four axis J6’s are offered, with either an A-axis or a B-axis; and one five axis J6 is also offered, with a B over A axis configuration. True three point leveling allows for quick machine installation, and long-term stability of equipment alignments.
Please contact your Makino representative to learn more about this machine, which can be tailored to your specific high-volume machining system needs.
A-Axis
Unlimited (A-axis type) +90° / -180° (A/B-axes type)
B-Axis
Unlimited (A-axis, A/B-axes types)
Spindle RPM
16000 (12000 Opt.)
Spindle Taper
HSK-A63
Rapid Traverse
75,000 mm/min
Cutting Feedrate
50,000 mm/min
Maximum Workpiece
Differs by kinematic variant (consult factory for details)
Maximum Payload
500 kg (B-axis type) 400 kg (A-axis, A/B-axes types)
ATC Capacity
30 (40 Opt.)
Chip to Chip
2.0 sec +/- 10%
Maximum Tool Diameter
Ø100 mm (Ø125 mm w/limitations)
Maximum Tool Weight
8 kg
A-Axis:
Unlimited (A-axis type) +90° / -180° (A/B-axes type)
B-Axis:
Unlimited (A-axis, A/B-axes types)
Spindle RPM:
16000 (12000 Opt.)
Spindle Taper:
HSK-A63
Rapid Traverse:
2,953 ipm
Cutting Feedrate:
1,968 in/min
Maximum Workpiece:
Differs by kinematic variant (consult factory for details)
Maximum Payload:
1,100 lbs. (B-axis type) 880 lbs (A-axis, A/B-axes types)
ATC Capacity:
30 (40 Opt.)
Chip to Chip:
2.0 sec +/- 10%
Maximum Tool Diameter:
Ø3.9” (Ø4.9” w/limitations)
Maximum Tool Weight:
17.6 lbs.
© 2024, Makino Inc. All rights reserved.
